Thanks for the info.....at least now I learned what Enterprise wpa. is.Also is there a way to direct a question directly to Pascal or Mike in the discord.
Hello all! I am setting up a new robot on vigibot however the wi-fi that I will be using requires 3 inputs to connect to the wifi.In order to connect to the wifi i must enter the following information: ssid,my 6 digit employee number,and then my employee password.In the config file there is only ssid and pw.My question is ,"what must i do to use this wifi.Thanks
Mike...good news .I got the robot working! The problem was low voltage on my battery...I replaced with a fresh battery and all is a go. The robots name is Harry and I hope to have up him up and running on vigibot by the end of the week...Thanks for your help and long live Vigibot!
I am using a raspberry pi 3 and two parallax continuous rotation servos. The servos are connected to pins 26 and 27. I am using the default config.Before asking for help i did follow the instructions in the forum that you referenced.Do I need to change the outs of the config.?..or something else in the config.Also please excuse me if i relpy late to your help ...the time difference is the reason(i am in florida).thanks for your help again
Mon contenu
Non spécifié
