219 réponses à ce sujet

[Deleted_User]

Guys

[ethanyeang]

Is D Cloud Server still running normally? I can't log in.

[ethanyeang]

 image.png   794,57 Ko   0 téléchargement(s)

[drobo_community]

@shockley please check

[shockley_10497]

Hi Ethan, could you clarify if you are trying to access RDK-Studio or the D-Robotics Forums?

[rustedfriend]

I'm not sure if it's the intended behavior, but for me when do the sso login it tells me the login was successful but nothing happens. I'm just at the login page indefinitely. But I can log into the rdk studio program fine.

[naren_bhau_77570]

Yes same is happening with me also... I also have doubt on that when I login this page it only say login successfull but nothing after it.

[shockley_10497]

The registration link has been updated. Please check:  image.png   124,59 Ko   0 téléchargement(s)

[naren_bhau_77570]

showing error  image.png   36,33 Ko   0 téléchargement(s)

[shockley_10497]

I can access it. Could you show me your IP address?  image.png   649,53 Ko   0 téléchargement(s)  image.png   604,54 Ko   0 téléchargement(s)

[rustedfriend]

I just tested and I can hit the site. I also got a security warning, but I was able to tell it to proceed anyways.

[naren_bhau_77570]

Thanks.. now that link is working perfectly.... But I am facing one problem I login to the website with my credentials and now after downloading the software I am putting same credentials it's saying 'fetch failed'

[naren_bhau_77570]

 image.png   360,59 Ko   0 téléchargement(s)

[shockley_10497]

Sorry for the confusion. The rdk studio account and the forum account are not linked. You need to register a new account for this software.

[shockley_10497]

Try clearing your browser cache and cookies, or open it in an incognito window to see if that bypasses the warning.

[vishal095015]

hi guys please help me to connect rdk x5 to rdk studio

[vishal095015]

:smiling_face_with_tear: :sleepy_face:

[shockley_10497]

To connect your RDK X5 to RDK Studio, you can either use the Ethernet port by setting your PC to a static IP in the 192.168.127.x subnet (connecting to the board's default 192.168.127.10) or, more simply, use the USB Type-C "Quick Connect" which creates a virtual network interface at 192.168.128.10 for immediate SSH access without manual network configuration.  image.png   94,69 Ko   0 téléchargement(s)

[vishal095015]

i did but it cont worked

[vishal095015]

i want to use RDK type-c direct, so please help me to solve this problem:sleepy_face:
[Autocollant Discord : Sad]