1110 réponses à ce sujet

[pratiklinear]

i did all these steps

[pratiklinear]

 image.png   405,37 Ko   0 téléchargement(s)

[dd2mf]

Isn't all of those post-install steps?

[pratiklinear]

yes, post image burn right?

[dd2mf]

Yes

[pratiklinear]

yeah, i burned the 2.1.1 iso image of RDKx3 and then created the ssh file in boot

[pratiklinear]

after that im trying this ssh remote

[dd2mf]

I haven't tried that method so I don't really know, I'm guessing it's not really working well

[dd2mf]

Uart cables are pretty cheap tho

[dd2mf]

Or you could just use raspberry pi os

[rdk_wuchao]

Hello, can you show me your "ip addr show" in your Ubuntu machine? (PC, not the developer board)

[pratiklinear]

okay ill get it!, thanks

[pratiklinear]

 image.png   378,87 Ko   0 téléchargement(s)

[rdk_wuchao]

Fine, just try UART to login in the develop board, it may show us the reason after login in the board.

[mikelikesrobots]

Your Ubuntu machine is on 192.168.1.100. How do you know your board is on 192.168.1.10? You can't have set a static IP address yet because you haven't connected to the board at all

[dd2mf]

In this situation @pratiklinear u can use "sudo arp-scan --localnet" to list all devices and their IP/MAC devices

[dd2mf]

Or "nmap -sn 192.168.1.0/24" after installing nmap

[pratiklinear]

okay ill try once i get the UART

[pratiklinear]

okay, so there was this step

https://d-robotics.g...guration_wizard

i didnt do this as it required the monitor, so its necessary to do this step with the monitor?

[pratiklinear]

okay trying now