Bonjour tout le monde !
J'ai un Shield Ethernet 2 que je veux utiliser avec mon arduino Uno.
Mon problème :
Lorsque je veux tester un code d'exemple de la librairie <Ethernet.h> (l'exemple WebServer), rien ne se passe.
J'ai bien rentré l'adresse mac du Shield. J'ai également changé l''adresse ip pour en utiliser une qui n'est pas utilisé sur mon réseau.
Je fais donc un ping sur cette ip et j'obtient "Impossible de joindre l’hôte de destination."
En ouvrant mon port série, je me suis aperçu que je restais bloqué juste avant mon server.begin()
#include <SPI.h> #include <Ethernet.h> byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }; IPAddress ip(192, 168, 1, 177); // Initialize the Ethernet server library // with the IP address and port you want to use // (port 80 is default for HTTP): EthernetServer server(80); void setup() { // Open serial communications and wait for port to open: Serial.begin(9600); while (!Serial) { ; // wait for serial port to connect. Needed for native USB port only } // start the Ethernet connection and the server: Ethernet.begin(mac, ip); Serial.println("Before server.begin()"); server.begin(); Serial.println("After server.begin()"); Serial.print("server is at "); Serial.println(Ethernet.localIP()); } void loop() { // listen for incoming clients EthernetClient client = server.available(); if (client) { Serial.println("new client"); // an http request ends with a blank line boolean currentLineIsBlank = true; while (client.connected()) { if (client.available()) { char c = client.read(); Serial.write(c); // if you've gotten to the end of the line (received a newline // character) and the line is blank, the http request has ended, // so you can send a reply if (c == '\n' && currentLineIsBlank) { // send a standard http response header client.println("HTTP/1.1 200 OK"); client.println("Content-Type: text/html"); client.println("Connection: close"); // the connection will be closed after completion of the response client.println("Refresh: 5"); // refresh the page automatically every 5 sec client.println(); client.println("<!DOCTYPE HTML>"); client.println("<html>"); // output the value of each analog input pin for (int analogChannel = 0; analogChannel < 6; analogChannel++) { int sensorReading = analogRead(analogChannel); client.print("analog input "); client.print(analogChannel); client.print(" is "); client.print(sensorReading); client.println("<br />"); } client.println("</html>"); break; } if (c == '\n') { // you're starting a new line currentLineIsBlank = true; } else if (c != '\r') { // you've gotten a character on the current line currentLineIsBlank = false; } } } // give the web browser time to receive the data delay(1); // close the connection: client.stop(); Serial.println("client disconnected"); } }
D'où pourrait venir cette erreur ?
Autre précision, n'ayant pas de sortie ethernet murale, je passe pas mon PC. Je mets un câble qui relie une switch, et de cette switch je vais à mon Shield.
Merci d'avance pour vos réponse !