Aller au contenu

  2. → Affichage d'un profil : Messages: Tolo

Tolo

Inscrit(e) (le) 29 sept. 2021
Déconnecté Dernière activité nov. 04 2021 03:38
-----

Messages que j'ai postés

Dans le sujet : Robot dans le train

29 octobre 2021 - 08:53

Exactly! On the tank there will be another platform where it will be and be fixed the wheelchair.


Dans le sujet : Robot dans le train

29 octobre 2021 - 07:01

It's my fault! The video did not make it clear. The idea would be to replicate this platform so that the wheelchairs could access the tank and get on top, where, the van is the tank.
 
 

When you do an horizontal video, the camera must be too horizontal on your cellular.

 

I had put auto rotation on the mobile and it looks like the camera hasn't like it.

 

Why you don't put here, the links of the videos ? 

I wanted to attach them, but since I couldn't I uploaded them to the Drive so I could share them as I haven't uploaded them anywhere else.

 

To all this, I will obviously reference your designs and I will thank you for your help in my work, for that reason I would to know your full name.

 


Dans le sujet : Robot dans le train

29 octobre 2021 - 03:27

I have finally finished the assembly and tried the first programs!
 
See here:
 
It works autonomously, the cable is not a control, it is the power supply of the ESP32.
 
It's amazing the power it has with just two motors!
 
Now I’m thinking about how to finish putting the zipper pinion on for lifting platform to robot access.
 
see here (more or less) what I mean:
 
Sorry for the quality of the videos it has never been my forte.
 
 

Dans le sujet : Robot dans le train

19 octobre 2021 - 01:05

So is the height I cut okay or do I have to cut even further along?
 
Okay, I’ll start at 58cm and look at which length fits best.
 
I think you wanted to attach an image that you didn’t upload in the end, could you share it?
It will really help me to finally know how to paste it properly.
 
As you can see, I follow your techniques, however I wanted to finish confirming that they really are the most competent and to be able to justify following his techniques.
 
There is little left to have the whole structure! Thanks again for your patience and support.

Dans le sujet : Robot dans le train

18 octobre 2021 - 03:52

Bonjour Oracid,
 
The color has actually been determined by the cost of each piece.
 
In the end I have decided to control the engines with the Arduino program, because I have been looking and it is really simple.
 
I already have the caterpillar parts, glue and windows joint. I made sure to buy the same product you indicated to me.
 
I’ve been watching how you cut it, would that be where I mark and cut? Are they 7 cm long?
 
Fichier joint  goma.png   1,21 Mo   55 téléchargement(s)
 
Any special instructions when pasting it to the lego piece?
 
By the way, I’ve seen that lego has a couple of pieces to help with roughness. 
 
Fichier joint  Captura.PNG   1,29 Mo   55 téléchargement(s) Fichier joint  HTB1ywj.aDHuK1RkSndVq6xVwpXaf.jpg   69,23 Ko   57 téléchargement(s)
 
I know you worked with rubber bands and then with another type of windows joint. Have you been able to test and compare lego pieces with your solutions?

  1. Robot Maker
  2. → Affichage d'un profil : Messages: Tolo
  3. Privacy Policy