La Fabrik

et le play_sd_wav.h
 

/* Audio Library for Teensy 3.X
 * Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
 *
 * Development of this audio library was funded by PJRC.COM, LLC by sales of
 * Teensy and Audio Adaptor boards.  Please support PJRC's efforts to develop
 * open source software by purchasing Teensy or other PJRC products.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice, development funding notice, and this permission
 * notice shall be included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#ifndef play_sd_wavx_h_
#define play_sd_wavx_h_

#include "Arduino.h"
#include "AudioStream.h"
#include "SD.h"

class AudioPlaySdWavX : public AudioStream
{
public:
    AudioPlaySdWavX(void) : AudioStream(0, NULL), block_left(NULL), block_right(NULL) { begin(); }
    void begin(void);
    bool play(const char *filename);
    void togglePlayPause(void);
    void stop(void);
    bool isPlaying(void);
    bool isPaused(void);
    bool isStopped(void);
    uint32_t positionMillis(void);
    uint32_t lengthMillis(void);
    virtual void update(void);
private:
    File wavfile;
    bool consume(uint32_t size);
    bool parse_format(void);
    uint32_t header[10];        // temporary storage of wav header data
    uint32_t data_length;        // number of bytes remaining in current section
    uint32_t total_length;        // number of audio data bytes in file
    uint32_t bytes2millis;
    audio_block_t *block_left;
    audio_block_t *block_right;
    uint16_t block_offset;        // how much data is in block_left & block_right
    uint8_t buffer[AUDIO_BLOCK_SAMPLES*sizeof(int16_t)*2];        // buffer two blocks of data
    uint16_t buffer_offset;        // where we're at consuming "buffer"
    uint16_t buffer_length;        // how much data is in "buffer"
    uint8_t header_offset;        // number of bytes in header[]
    uint8_t state;
    uint8_t state_play;
    uint8_t leftover_bytes;
};

#endif

Bonjour à tous,
voilà mon premier projet avec arduino, j'avoue que je n'y connais pas grand chose mais j'essaie de comprendre en utilisant mes notions de PHP, javascript etc.

Je suis sur un projet qui est presque terminé, c'est une sorte de répondeur qui enregistre les messages sur une carte SD. J'ai un bouton qui me permet de lire les enregistrements mais cela ne lit que le dernier.
En modifiant PlayAllRecordings à la place de PlatLastRecording j'arrive à lire tout mais cela commence par le plus ancien. Or J'aimerai lire plusieurs messages en partant du dernier pour écouter le plus récent dabord donc. Eventuellement choisir une limite par exemple les 5 ou 10 derniers, mais toujours avec le plus récent en premier de façon à écouter dabord celui que l'on vient d'enregistrer.

Donc en gros quand je décroche le combiné, j'appuie sur le bouton lecture, j'entend le message que je viens d'enregistrer, puis le précédent,, puis encore le précédent et ainsi de suite avec une limite queje pourrai remettre à 1 facilement pour n'écouter que le dernier.

J'ai suivi un tuto pour faire tout ça, donc le code n'est pas de moi. J'espère que vous allez pouvoir m'aider car cette fonctionnalité m’intéresse vraiment beaucoup.

Merci par avance à ceux qui me répondront, en espérant qu'une solution simple me permette d'y arriver

voici le code:
 

/**
 * Audio Guestbook, Copyright (c) 2022 Playful Technology
 * 
 * Tested using a Teensy 4.0 with Teensy Audio Shield, although should work 
 * with minor modifications on other similar hardware
 * 
 * When handset is lifted, a pre-recorded greeting message is played, followed by a tone.
 * Then, recording starts, and continues until the handset is replaced.
 * Playback button allows all messages currently saved on SD card through earpiece 
 * 
 * Files are saved on SD card as 44.1kHz, 16-bit, mono signed integer RAW audio format 
 * --> changed this to WAV recording, DD4WH 2022_07_31
 * --> added MTP support, which enables copying WAV files from the SD card via the USB connection, DD4WH 2022_08_01
 * 
 * 
 * Frank DD4WH, August 1st 2022 
 * for a DBP 611 telephone (closed contact when handheld is lifted) & with recording to WAV file
 * contact for switch button 0 is closed when handheld is lifted
 * 
 * GNU GPL v3.0 license
 * 
 */

#include <Bounce.h>
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <TimeLib.h>
#include <MTP_Teensy.h>
#include "play_sd_wav.h" // local copy with fixes

// DEFINES
// Define pins used by Teensy Audio Shield
#define SDCARD_CS_PIN    10
#define SDCARD_MOSI_PIN  7
#define SDCARD_SCK_PIN   14
// And those used for inputs
#define HOOK_PIN 0
#define PLAYBACK_BUTTON_PIN 1

#define noINSTRUMENT_SD_WRITE

// GLOBALS
// Audio initialisation code can be generated using the GUI interface at https://www.pjrc.com/teensy/gui/
// Inputs
AudioSynthWaveform          waveform1; // To create the "beep" sfx
AudioInputI2S               i2s2; // I2S input from microphone on audio shield
AudioPlaySdWavX              playWav1; // Play 44.1kHz 16-bit PCM greeting WAV file
AudioRecordQueue            queue1; // Creating an audio buffer in memory before saving to SD
AudioMixer4                 mixer; // Allows merging several inputs to same output
AudioOutputI2S              i2s1; // I2S interface to Speaker/Line Out on Audio shield
AudioConnection patchCord1(waveform1, 0, mixer, 0); // wave to mixer 
AudioConnection patchCord3(playWav1, 0, mixer, 1); // wav file playback mixer
AudioConnection patchCord4(mixer, 0, i2s1, 0); // mixer output to speaker (L)
AudioConnection patchCord6(mixer, 0, i2s1, 1); // mixer output to speaker (R)
AudioConnection patchCord5(i2s2, 0, queue1, 0); // mic input to queue (L)
AudioControlSGTL5000      sgtl5000_1;

// Filename to save audio recording on SD card
char filename[15];
// The file object itself
File frec;

// Use long 40ms debounce time on both switches
Bounce buttonRecord = Bounce(HOOK_PIN, 40);
Bounce buttonPlay = Bounce(PLAYBACK_BUTTON_PIN, 40);

// Keep track of current state of the device
enum Mode {Initialising, Ready, Prompting, Recording, Playing};
Mode mode = Mode::Initialising;

float beep_volume = 0.04f; // not too loud :-)

uint32_t MTPcheckInterval; // default value of device check interval [ms]

//Timer
unsigned long startTime = 0;

// variables for writing to WAV file
unsigned long ChunkSize = 0L;
unsigned long Subchunk1Size = 16;
unsigned int AudioFormat = 1;
unsigned int numChannels = 1;
unsigned long sampleRate = 44100;
unsigned int bitsPerSample = 16;
unsigned long byteRate = sampleRate*numChannels*(bitsPerSample/8);// samplerate x channels x (bitspersample / 8)
unsigned int blockAlign = numChannels*bitsPerSample/8;
unsigned long Subchunk2Size = 0L;
unsigned long recByteSaved = 0L;
unsigned long NumSamples = 0L;
byte byte1, byte2, byte3, byte4;


void setup() {

  Serial.begin(9600);
  while (!Serial && millis() < 5000) {
    // wait for serial port to connect.
  }
  Serial.println("Serial set up correctly");
  Serial.printf("Audio block set to %d samples\n",AUDIO_BLOCK_SAMPLES);
  print_mode();
  // Configure the input pins
  pinMode(HOOK_PIN, INPUT_PULLUP);
  pinMode(PLAYBACK_BUTTON_PIN, INPUT_PULLUP);

  // Audio connections require memory, and the record queue
  // uses this memory to buffer incoming audio.
  AudioMemory(60);

  // Enable the audio shield, select input, and enable output
  sgtl5000_1.enable();
  // Define which input on the audio shield to use (AUDIO_INPUT_LINEIN / AUDIO_INPUT_MIC)
  sgtl5000_1.inputSelect(AUDIO_INPUT_MIC);
  //sgtl5000_1.adcHighPassFilterDisable(); //
  sgtl5000_1.volume(0.95);

  mixer.gain(0, 1.0f);
  mixer.gain(1, 1.0f);

  // Play a beep to indicate system is online
  waveform1.begin(beep_volume, 440, WAVEFORM_SINE);
  wait(1000);
  waveform1.amplitude(0);
  delay(1000);

  // Initialize the SD card
  SPI.setMOSI(SDCARD_MOSI_PIN);
  SPI.setSCK(SDCARD_SCK_PIN);
  if (!(SD.begin(SDCARD_CS_PIN))) 
  {
    // stop here if no SD card, but print a message
    while (1) {
      Serial.println("Unable to access the SD card");
      delay(500);
    }
  }
    else Serial.println("SD card correctly initialized");


  // mandatory to begin the MTP session.
    MTP.begin();

  // Add SD Card
//    MTP.addFilesystem(SD, "SD Card");
    MTP.addFilesystem(SD, "Audio guestbook"); // choose a nice name for the SD card volume to appear in your file explorer
    Serial.println("Added SD card via MTP");
    MTPcheckInterval = MTP.storage()->get_DeltaDeviceCheckTimeMS();
    
    // Value in dB
//  sgtl5000_1.micGain(15);
  sgtl5000_1.micGain(20); // much lower gain is required for the AOM5024 electret capsule

  // Synchronise the Time object used in the program code with the RTC time provider.
  // See https://github.com/PaulStoffregen/Time
  setSyncProvider(getTeensy3Time);
  
  // Define a callback that will assign the correct datetime for any file system operations
  // (i.e. saving a new audio recording onto the SD card)
  FsDateTime::setCallback(dateTime);

  mode = Mode::Ready; print_mode();
}

void loop() {
  // First, read the buttons
  buttonRecord.update();
  buttonPlay.update();

  switch(mode){
    case Mode::Ready:
      // Falling edge occurs when the handset is lifted --> 611 telephone
      if (buttonRecord.fallingEdge()) {
        Serial.println("Handset lifted");
        mode = Mode::Prompting; print_mode();
      }
      else if(buttonPlay.fallingEdge()) {
        //playAllRecordings();
        playAllRecordings();
      }
      break;

    case Mode::Prompting:
      // Wait a second for users to put the handset to their ear
      wait(1000);
      // Play the greeting inviting them to record their message
      playWav1.play("greeting.wav");    
      // Wait until the  message has finished playing
//      while (playWav1.isPlaying()) {
      while (!playWav1.isStopped()) {
        // Check whether the handset is replaced
        buttonRecord.update();
        buttonPlay.update();
        // Handset is replaced
        if(buttonRecord.risingEdge()) {
          playWav1.stop();
          mode = Mode::Ready; print_mode();
          return;
        }
        if(buttonPlay.fallingEdge()) {
          playWav1.stop();
          //playAllRecordings();
          playAllRecordings();
          return;
        }
        
      }
      // Debug message
      Serial.println("Starting Recording");
      // Play the tone sound effect
      waveform1.begin(beep_volume, 440, WAVEFORM_SINE);
      wait(1250);
      waveform1.amplitude(0);
      // Start the recording function
      startRecording();
      //Timer
      startTime = millis();
      break;

    case Mode::Recording:
      // Handset is replaced
      if(buttonRecord.risingEdge() || millis() - startTime >= 120000) {
        // Debug log
        Serial.println("Stopping Recording");
        // Stop recording
        stopRecording();
        // Play audio tone to confirm recording has ended
        end_Beep();
      }
      else {
        continueRecording();
      }
      break;

    case Mode::Playing: // to make compiler happy
      break;  

    case Mode::Initialising: // to make compiler happy
      break;  
  }   
  
  MTP.loop();  // This is mandatory to be placed in the loop code.
}

void setMTPdeviceChecks(bool nable)
{
  if (nable)
  {
    MTP.storage()->set_DeltaDeviceCheckTimeMS(MTPcheckInterval);
    Serial.print("En");
  }
  else
  {
    MTP.storage()->set_DeltaDeviceCheckTimeMS((uint32_t) -1);
    Serial.print("Dis");
  }
  Serial.println("abled MTP storage device checks");
}
  

#if defined(INSTRUMENT_SD_WRITE)
static uint32_t worstSDwrite, printNext;
#endif // defined(INSTRUMENT_SD_WRITE)

void startRecording() {
  setMTPdeviceChecks(false); // disable MTP device checks while recording
#if defined(INSTRUMENT_SD_WRITE)
  worstSDwrite = 0;
  printNext = 0;
#endif // defined(INSTRUMENT_SD_WRITE)
  // Find the first available file number
//  for (uint8_t i=0; i<9999; i++) { // BUGFIX uint8_t overflows if it reaches 255  
  for (uint16_t i=0; i<99990; i++) {   
    // Format the counter as a five-digit number with leading zeroes, followed by file extension
    snprintf(filename, 11, " %05d.wav", i);
    // Create if does not exist, do not open existing, write, sync after write
    if (!SD.exists(filename)) {
      break;
    }
  }
  frec = SD.open(filename, FILE_WRITE);
  Serial.println("Opened file !");
  if(frec) {
    Serial.print("Recording to ");
    Serial.println(filename);
    queue1.begin();
    mode = Mode::Recording; print_mode();
    recByteSaved = 0L;
  }
  else {
    Serial.println("Couldn't open file to record!");
  }
}

void continueRecording() {
#if defined(INSTRUMENT_SD_WRITE)
  uint32_t started = micros();
#endif // defined(INSTRUMENT_SD_WRITE)
#define NBLOX 16  
  // Check if there is data in the queue
  if (queue1.available() >= NBLOX) {
    byte buffer[NBLOX*AUDIO_BLOCK_SAMPLES*sizeof(int16_t)];
    // Fetch 2 blocks from the audio library and copy
    // into a 512 byte buffer.  The Arduino SD library
    // is most efficient when full 512 byte sector size
    // writes are used.
    for (int i=0;i<NBLOX;i++)
    {
      memcpy(buffer+i*AUDIO_BLOCK_SAMPLES*sizeof(int16_t), queue1.readBuffer(), AUDIO_BLOCK_SAMPLES*sizeof(int16_t));
      queue1.freeBuffer();
    }
    // Write all 512 bytes to the SD card
    frec.write(buffer, sizeof buffer);
    recByteSaved += sizeof buffer;
  }
  
#if defined(INSTRUMENT_SD_WRITE)
  started = micros() - started;
  if (started > worstSDwrite)
    worstSDwrite = started;

  if (millis() >= printNext)
  {
    Serial.printf("Worst write took %luus\n",worstSDwrite);
    worstSDwrite = 0;
    printNext = millis()+250;
  }
#endif // defined(INSTRUMENT_SD_WRITE)
}

void stopRecording() {
  // Stop adding any new data to the queue
  queue1.end();
  // Flush all existing remaining data from the queue
  while (queue1.available() > 0) {
    // Save to open file
    frec.write((byte*)queue1.readBuffer(), AUDIO_BLOCK_SAMPLES*sizeof(int16_t));
    queue1.freeBuffer();
    recByteSaved += AUDIO_BLOCK_SAMPLES*sizeof(int16_t);
  }
  writeOutHeader();
  // Close the file
  frec.close();
  Serial.println("Closed file");
  mode = Mode::Ready; print_mode();
  setMTPdeviceChecks(true); // enable MTP device checks, recording is finished
}


void playAllRecordings() {
  // Recording files are saved in the root directory
 wait(2000);
  File dir = SD.open("/");
  
  while (true) {
    File entry =  dir.openNextFile();
    if (strstr(entry.name(), "greeting"))
    {
       entry =  dir.openNextFile();
    }
    if (!entry) {
      // no more files
      entry.close();
      end_Beep();
      break;
    }
    //int8_t len = strlen(entry.name()) - 4;
//    if (strstr(strlwr(entry.name() + (len - 4)), ".raw")) {
//    if (strstr(strlwr(entry.name() + (len - 4)), ".wav")) {
    // the lines above throw a warning, so I replace them with this (which is also easier to read):
    if (strstr(entry.name(), ".wav") || strstr(entry.name(), ".WAV")) {
      Serial.print("Now playing ");
      Serial.println(entry.name());
      // Play a short beep before each message
      waveform1.amplitude(beep_volume);
      wait(750);
      waveform1.amplitude(0);
      // Play the file
      playWav1.play(entry.name());
      mode = Mode::Playing; print_mode();
    }
    entry.close();

//    while (playWav1.isPlaying()) { // strangely enough, this works for playRaw, but it does not work properly for playWav
    while (!playWav1.isStopped()) { // this works for playWav
      buttonPlay.update();
      buttonRecord.update();
      // Button is pressed again
//      if(buttonPlay.risingEdge() || buttonRecord.risingEdge()) { // FIX
      if(buttonPlay.fallingEdge() || buttonRecord.risingEdge()) { 
        playWav1.stop();
        mode = Mode::Ready; print_mode();
        return;
      }   
    }
  }
  // All files have been played
  mode = Mode::Ready; print_mode();
}

void playLastRecording() {
  // Find the first available file number
  uint16_t idx = 0; 
  for (uint16_t i=0; i<9999; i++) {
    // Format the counter as a five-digit number with leading zeroes, followed by file extension
    snprintf(filename, 11, " %05d.wav", i);
    // check, if file with index i exists
    if (!SD.exists(filename)) {
     idx = i - 1;
     break;
      }
  }
      // now play file with index idx == last recorded file
      snprintf(filename, 11, " %05d.wav", idx);
      Serial.println(filename);
      playWav1.play(filename);
      mode = Mode::Playing; print_mode();
      while (!playWav1.isStopped()) { // this works for playWav
      buttonPlay.update();
      buttonRecord.update();
      // Button is pressed again
//      if(buttonPlay.risingEdge() || buttonRecord.risingEdge()) { // FIX
      if(buttonPlay.fallingEdge() || buttonRecord.risingEdge()) {
        playWav1.stop();
        mode = Mode::Ready; print_mode();
        return;
      }   
    }
      // file has been played
  mode = Mode::Ready; print_mode();  
  end_Beep();
}


// Retrieve the current time from Teensy built-in RTC
time_t getTeensy3Time(){
  return Teensy3Clock.get();
}

// Callback to assign timestamps for file system operations
void dateTime(uint16_t* date, uint16_t* time, uint8_t* ms10) {

  // Return date using FS_DATE macro to format fields.
  *date = FS_DATE(year(), month(), day());

  // Return time using FS_TIME macro to format fields.
  *time = FS_TIME(hour(), minute(), second());

  // Return low time bits in units of 10 ms.
  *ms10 = second() & 1 ? 100 : 0;
}

// Non-blocking delay, which pauses execution of main program logic,
// but while still listening for input 
void wait(unsigned int milliseconds) {
  elapsedMillis msec=0;

  while (msec <= milliseconds) {
    buttonRecord.update();
    buttonPlay.update();
    if (buttonRecord.fallingEdge()) Serial.println("Button (pin 0) Press");
    if (buttonPlay.fallingEdge()) Serial.println("Button (pin 1) Press");
    if (buttonRecord.risingEdge()) Serial.println("Button (pin 0) Release");
    if (buttonPlay.risingEdge()) Serial.println("Button (pin 1) Release");
  }
}


void writeOutHeader() { // update WAV header with final filesize/datasize

//  NumSamples = (recByteSaved*8)/bitsPerSample/numChannels;
//  Subchunk2Size = NumSamples*numChannels*bitsPerSample/8; // number of samples x number of channels x number of bytes per sample
  Subchunk2Size = recByteSaved - 42; // because we didn't make space for the header to start with! Lose 21 samples...
  ChunkSize = Subchunk2Size + 34; // was 36;
  frec.seek(0);
  frec.write("RIFF");
  byte1 = ChunkSize & 0xff;
  byte2 = (ChunkSize >> 8) & 0xff;
  byte3 = (ChunkSize >> 16) & 0xff;
  byte4 = (ChunkSize >> 24) & 0xff;  
  frec.write(byte1);  frec.write(byte2);  frec.write(byte3);  frec.write(byte4);
  frec.write("WAVE");
  frec.write("fmt ");
  byte1 = Subchunk1Size & 0xff;
  byte2 = (Subchunk1Size >> 8) & 0xff;
  byte3 = (Subchunk1Size >> 16) & 0xff;
  byte4 = (Subchunk1Size >> 24) & 0xff;  
  frec.write(byte1);  frec.write(byte2);  frec.write(byte3);  frec.write(byte4);
  byte1 = AudioFormat & 0xff;
  byte2 = (AudioFormat >> 8) & 0xff;
  frec.write(byte1);  frec.write(byte2); 
  byte1 = numChannels & 0xff;
  byte2 = (numChannels >> 8) & 0xff;
  frec.write(byte1);  frec.write(byte2); 
  byte1 = sampleRate & 0xff;
  byte2 = (sampleRate >> 8) & 0xff;
  byte3 = (sampleRate >> 16) & 0xff;
  byte4 = (sampleRate >> 24) & 0xff;  
  frec.write(byte1);  frec.write(byte2);  frec.write(byte3);  frec.write(byte4);
  byte1 = byteRate & 0xff;
  byte2 = (byteRate >> 8) & 0xff;
  byte3 = (byteRate >> 16) & 0xff;
  byte4 = (byteRate >> 24) & 0xff;  
  frec.write(byte1);  frec.write(byte2);  frec.write(byte3);  frec.write(byte4);
  byte1 = blockAlign & 0xff;
  byte2 = (blockAlign >> 8) & 0xff;
  frec.write(byte1);  frec.write(byte2); 
  byte1 = bitsPerSample & 0xff;
  byte2 = (bitsPerSample >> 8) & 0xff;
  frec.write(byte1);  frec.write(byte2); 
  frec.write("data");
  byte1 = Subchunk2Size & 0xff;
  byte2 = (Subchunk2Size >> 8) & 0xff;
  byte3 = (Subchunk2Size >> 16) & 0xff;
  byte4 = (Subchunk2Size >> 24) & 0xff;  
  frec.write(byte1);  frec.write(byte2);  frec.write(byte3);  frec.write(byte4);
  frec.close();
  Serial.println("header written"); 
  Serial.print("Subchunk2: "); 
  Serial.println(Subchunk2Size); 
}

void end_Beep(void) {
          waveform1.frequency(523.25);
        waveform1.amplitude(beep_volume);
        wait(250);
        waveform1.amplitude(0);
        wait(250);
        waveform1.amplitude(beep_volume);
        wait(250);
        waveform1.amplitude(0);
        wait(250);
        waveform1.amplitude(beep_volume);
        wait(250);
        waveform1.amplitude(0);
        wait(250);
        waveform1.amplitude(beep_volume);
        wait(250);
        waveform1.amplitude(0);
}

void print_mode(void) { // only for debugging
  Serial.print("Mode switched to: ");
  // Initialising, Ready, Prompting, Recording, Playing
  if(mode == Mode::Ready)           Serial.println(" Ready");
  else if(mode == Mode::Prompting)  Serial.println(" Prompting");
  else if(mode == Mode::Recording)  Serial.println(" Recording");
  else if(mode == Mode::Playing)    Serial.println(" Playing");
  else if(mode == Mode::Initialising)  Serial.println(" Initialising");
  else Serial.println(" Undefined");
}

Bonjour à tous !
Je me présente, je suis Kévin, complètement débutant avec Arduino mais j'ai envie de m'y intéresser.
Je suis photographe professionnel, mais j'adore fabriquer des choses. J'ai fabriqué 3 bornes à selfies, une borne d'arcade type bartop, récemment une console portable à partir d'un vieux PC "inutilisable" et je suis sur un nouveau projet qui m'a amené vers vous, j'en parlerai dans un autre post, car c'est là que je vais avoir besoin de vos lumières (jeu de mot de photographe ahaha)

A bientôt !